Filter
Top Products
High-Wall Type
Owner’s Manual
–10–
Toshiba
EN
14SLEEP button
Use to start the OFF timer operation that
automatically adjusts the room temperature and the
fan speed.
You can select the OFF timer time from four durations
(1, 3, 5 or 9 hours).
15COMFORT SLEEP button
Use to start the OFF timer operation that
automatically adjusts the room temperature and the
fan speed.
You can select the OFF timer time from four durations
(1, 3, 5 or 9 hours).
During group control operation, the set temperature
and the fan speed are not automatically adjusted.
Only off timer function is activated.
16QUIET button
Use to start quiet operation.
Pressing this button again will restore normal
operation.
Names and functions of
indications on wireless remote
control
Display
All indications, except for clock time indication, are
indicated by pressing the ON/OFF button.
• In the illustration, all indications are indicated for
explanation.
During operation, only the relevant indications
will be displayed on the remote control.
1 Transmission mark
This transmission mark ( ) displayed when the
remote control transmits signals to the indoor unit.
2 Operation mode
The selected operation mode is displayed.
(A : Auto changeover control, : Cool, : Dry,
: Heat, : Fan only)
3 Set temperature display
The selected fan speed is displayed (62 °F to 86 °F
(17 °C to 30°C)).
When you set the operating mode to : Fan only,
no temperature setting is indicated.
4 FAN speed display
Indicates the selected fan speed. AUTO or one of five
fan speed levels (LOW , LOW
+
,
MED , MED
+
,
HIGH ) can be indicated.
Indicates when the operating mode is :
Dry.
5 TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
CLR
SLEEP
SET
TEMP
13
14
9
6
16
2
7
5
4
3
15
12
11
8
1
0
1
1
0
7
5
4
6
9
8
12
3
10-EN
+001111052101_00Ta.book Page 10 Friday, November 20, 2009 1:13 PM