Filter
Top Products
SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle
plate area before using your machine the first
time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into
the cord socket (1) and your walt outlet (2) as
illustrated.
Connect the foot control plug (3) into the
machine socket.
NOTE: When foot control is disconnected, the
machine wilt not operate.
Pin
Pasador
Set power/tight switch at
"OFF"
Mettez l'interrupteur moteuri
lumiere sur "OFF".
Poner el Interruptor de comente/
luz de vetocidad en "OFF"
Machine socket
Connecteur de ta
machine
Conector de la maquina
Foot control
Rheostat
Control por pedal
cord
Cordon
Cord6n de la linea etectrica
Aiways disconneCt the maChJnefiom power
///_ SuPPlY bY removing the p!ug from the wa!!:out!et:
POWER/LIGHT SWITCH
Your machine wilt not operate until the power/
light switch is turned on. The same switch
controls both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
Power/tight switch "OFF"
Interrupteur moteur/tumiere "OFF"
Interruptor comente/tuz "OFF"
Power/tight switch "ON"
Interrupteur moteur/tumiere "ON"
Interruptor comente/tuz "ON"
10