Filter
Top Products
SECTION 5. LEARN THE STITCHES
Corded Buttonholes
Sat the M,lchinD
Thread tenshon
2 Io6
J: Slidinjr b=J{to_fmfa
Use this procedure when you want to
achieve a tailored, mote attracuve raised
buttonhole.
Use filler cord let toast 15 inches of heavy
thread).
Try a practice buttonhole f_rst.
2.
3.
4.
5.
6.
7.
8_
With the buttonho|e loot raised, hook the fffte_ cord on the cord spur at t!_e back ot the buttonhole foot.
Bring the ends toward you under the buttonhole Toot until they clear the trent end.
Hook the rifler cord into the forks on the front of the J foot to hold them tight.
Lower the needle into The garment where the buttonhole will start and lower the foot.
Sew the b_Itonholc according to the buttonhole sewing instructions on p. 72 to 73,
Each sideof the buttonhole and the barracks wiJt be sewn over the cord.
Remove the fabric trom the machine and cut the sewing threads.
Pail the nght_ end of the fffler cord to tighten =t,
Thread the end through a darmng needle, draw to the bottom side of the fabric and cut.
NOTE: To adjusI sutch density, see p. 73,
74