Filter
Top Products
SECTION 2. PREPARE YOUR MACHtNE FOR SEWING
Upper _ht_ad
e_lide
Draw thread from spool 4.
through bobbin winder upper
thread 9uide teas=on disc as
shown.
Place the threaded bobbin on
the bobbin wmding spmdle so
that the thread comes o_s on
top.
DQGGQ
m_QG
m_QQ_
5,
6. Holding onto end ot thread, depress the toot
control,
7. When the bobbin ts slightly filled, stop the machine
and clip the _b_ead commg trom the bobbin,
8, S_owly start '_he machine agam and w_nd the thread
until the bobbin stops.
NOTE: The Pattern indicator will read "SP" to show
the machine is wmding the bobbin.
Push the bobbinwmdingspmdte tuthe right until it 9- Push the bobbin wmdinl
clicks, spmdle to lhe tell and clip
the thread.
10. Remove the bobbin.
"_3. Push In th_ clutch |or norn'_al
sewing operation.
NOTES:
If ¥0# do not push m
the clutch, the ma_:hine
will not run when you
press the toot contro!,
Do not depress the _oot
contro! while sliding
the bobbin winding
spindle m elthe[
direction.
t9