Filter
Top Products
SECTION2. PREPAREYOURMACHINEFORSEWING ......
Prepare Your Top Thread
e Thread Your Needte
The numbered steps above to||ow the numbers
on the ittustrattons.
Dotted lines show places where the thread
loops and then Is polled t_ght.
I. Draw thread into thread guide using both hands.
2, While holding thread near spool, draw thread down into the tension area al'_d then around the
check spnng holder.
3, Firmly draw thread up and through take.up lever trom r_£ht to tell
#,. Draw thread down and slip it through the thread guide.
5, Thread then _sslipped into needle bar thread guided
6. Thread needle from trent to back,
NOTE: You may want to cul the end ul thread with sharp se}ssors tor easJer needie threadin(j,
2_