Filter
Top Products
SECTION 5. LEARN THE STITCHES
(_ Press the memory button.
The machine will automatically
barrack and sew down the r,ght
side.
Stop the machine when you are
directly opposite the first stitch
On the felt hand side.
• Stitch Density on One Side:
The sf_tehes on each side of the buttonhole should be the same stitch density,
To adjust, _se the feed balance dial below the Hand Wheel.
Feed
,'f //'_"_ /dia!
B
For Condition A: For Condition B:
Left Side Stitches too Far Apart Right Side Stitches too Far Apart
Iseeabove} (see above}
Turn the teed balance dial slightly Turn tile _eed balance dia_ slightly
toward °'+°" Use the large screw toward "--"
driver tn your accessory box.
After adjusting tl_e feed baldnce dial, sew another test buttonhole to be sure
your adjustment ts correcL
NOTE: Remember to return the feed balance dial to the standard mark ( _> )
when you have completed the buttonholes.
73