Filter
Top Products
Quadra-Fire • QFP38 Series • 4061-300 Rev i • 9/09 19
Key Lock
This function will lock the keys to avoid unsupervised operation.
To activate this function, press the MODE and UP ARROW keys at the same time. (Figure 2.16.)
To de-activate this function, press the MODE and UP ARROW keys at the same time.
Figure 2.16 Key Lock Function
N. Low Battery Power Detection
Transmitter
The life span of the remote control batteries depends on various factors: quality of batteries used, the number of ignitions
of the appliance, the number of changes to the room thermostat set point, etc.
When the transmitter batteries are low, a battery icon will appear on the LCD display of the transmitter (Figure 2.17) be-
fore all battery power is lost. When the batteries are replaced this icon will disappear.
Figure 2.17 Battery Low Icon
O. Manual Bypass of the Remote System
If the batteries of the receiver or transmitter are low or depleted, the appliance can be turned on manually by sliding the
3-position slider switch on the receiver to the ON position. This will bypass the remote control feature of the system and
the appliance main burner will come on if the gas valve is in the ON position.
P. Remote Operation
This remote control kit has a hand held transmitter that can be used as a remote on/off or as a thermostat. The transmitter
display shows the current room temperature, target temperature, timer setting, on/off status, low battery indicator, current
time, burner/valve operation and fan operation. Electrical ratings for the receiver are: 110 VAC, 60 Hz, 6 W.