Quadra-Fire • QFP38 Series • 4061-300 Rev i • 9/0916
Remote Flame Control
The fl ame control has six fl ame levels. With the system on, and the fl ame level at the maximum in the appliance, press-
ing the DOWN ARROW key once will reduce the fl ame height by one step until the fl ame is turned off.
The UP ARROW key will increase the fl ame height each time it is pressed. If the UP ARROW key is pressed while the
system is on but the fl ame is off, the fame will come on in the hight position. (Figure 2.11.)
A single “beep” will confi rm reception of the command.
Flame Off Flame Level 1
Flame Level 5 Flame Level Maximum
Figure 2.11 Remote Flame Control