Phonetics 5100 Home Security System User Manual


 
92
Sensaphone
®
ISACC Instruction Manual
ALARM
Summary:
int alarm(n);
int n; Input Number
Description:
The alarm function generates an alarm condition for the input specified by n.
Return value:
The alarm function always returns a zero.
Example:
This program will initiate an alarm 3 condition if input 3 is greater than 100 and input
2 is greater than 90.
main()
{
if ((input(3)>100)&&(input(2)>90))
{
alarm(3);
}
}
NOTE: The Phone numbers, Selection and Dialout in the standard programming parameters
must be set up properly to generate an alarm, or nothing will happen.
DATA
Summary:
int data(n1,n2,n3,n4);
int n1; Number of hours
int n2; Number of minutes
int n3; Number of seconds
int n4; Start or stop, 0=stop, 1=start
Description:
The data function enables or disables the data logger, and specifies how often the data
logger executes.
Return value:
The data function always returns a zero.
Example:
This program will run the data logger every 2 minutes from 7:00am to 5:00pm, and
disables it at all other hours.
main()
{
if ((hours >= 7) && (hours <= 17))
{
data(0,2,0,1);
}
else
{
data(0,2,0,0);
}
}