Filter
Top Products
116
Sensaphone
®
ISACC Instruction Manual
The alarm has been acknowledged and the unit will then disconnect from the telephone line.
If the touch-tone code is not received, ISACC will respond by saying:
"Have a good day."
The alarm is not acknowledged. ISACC will continue calling the next phone number. You
may call the unit back using a touch-tone telephone, PC or terminal to acknowledge the
alarm. An alarm cannot be acknowledged using a pulse (rotary) telephone.
ALARM DIALOUT - DATA MODE
When ISACC dials to a PC or terminal using its internal modem, it sends data information
indicating the alarm condition. Acknowledgment is requested at the end of the report. You
may also program ISACC to acknowledge on carrier when dialing out in data mode.
Example: If acknowledge on carrier is selected as NO, ISACC will display the following
during a data mode alarm dialout:
ALARM DIALOUT
The time is 11:52:25 PM
the date is 12/29/93
Unit identification = Sun
Phone number of unit = 555-5674
Reason for dialout
IN02 = "HI SUMP FLOAT " = EXISTS
Acknowledge alarms (Y or N) ?
Type Y to acknowledge the alarm. Type N to leave the alarm unacknowledged. Enter your
answer. The following will then be displayed:
Stay online (Y or N)?
If you wish to stay online with ISACC to access programming and interrogate the unit, type Y.
If you do not want to stay online with ISACC, type N for NO. If you left the alarm unac-
knowledged, ISACC will then resume dialing the next phone number.
Example: If acknowledge on carrier is selected as YES, ISACC will display the following
during a data mode alarm dialout:
ALARM DIALOUT
The time is 11:52:25 PM
the date is 12/29/93
Unit identification = Sun
Phone number of unit = 555-5674
Reason for dialout
IN02 = "HI SUMP FLOAT " = EXISTS
Stay online (Y or N)?
If you type Y for YES, ISACC will allow you to stay online to program and interrogate.
If you type N for NO, ISACC will hang up and your PC or terminal will lose the carrier. In
either case, the alarm is acknowledged.