Filter
Top Products
11
Chapter 2: Installation
CHAPTER 2
INSTALLATION
This chapter explains the unpacking and installation of ISACC, both the complete package
(FGD-5000) and the board level product (FGD-5100). The complete package system is
mounted in a NEMA-4 ABS plastic enclosure with 18 VDC rechargeable battery backup. The
board-level unit is provided with a mounting kit so that you can mount the system properly
in another enclosure, etc. It is important that this chapter be read thoroughly and followed
very carefully before operating ISACC. Instructions for the complete package follow. For
instructions on installing the board level product, turn to page 15. Refer to Appendix B for a
diagram of the ISACC board layout.
COMPLETE PACKAGE INSTALLATION (FGD-5000)
UNPACKING ISACC
ISACC is shipped in specially designed packaging so that no damage will occur during ship-
ment. When unpacking the unit, be careful not to damage the equipment or the box. It is
recommended that the packaging be saved for future use.
Within the packaging will be a Warranty Registration Card. Please take the time to fill
this out and mail. The Limited 1 Year Warranty is explained in the back of this manual.
CAUTION
ISACC is a sensitive electronic device. Personnel and work area should be grounded
before handling this device. Do not install ISACC near strong electrostatic, electro-
magnetic, magnetic or radioactive fields, i.e. generators, huge motors, pumps, or
turbines. Do not attach the power supply cord to building surfaces.
GROUNDING WRIST STRAP
Enclosed with the product is a Disposable Grounding Wrist Strap. It is provided to help
control and prevent the possibility of damage due to static electricity.
To use the grounding wrist strap, unwrap the strap to expose the adhesive. Wrap this end
around your wrist. Unwrap the rest of the strap and peel the liner away from the copper foil,
located at the opposite end. Attach the copper foil to the steel back panel in the ISACC
enclosure. NOTE: The grounding wrist strap is for static control. It will not reduce or
increase the risk of receiving electrical shock.