National Instruments VXI Water System User Manual


 
©
National Instruments Corporation 2-1 VXI/VME-PCI8022 for Solaris
Chapter
2
PCI-MXI-2 Configuration
and Installation
This chapter contains the instructions to configure and install the
PCI-MXI-2 module.
Caution:
Electrostatic discharge can damage several components on your
PCI-MXI-2 module. To avoid such damage in handling the module,
touch the antistatic plastic package to a metal part of your computer
chassis before removing the PCI-MXI-2 from the package.
Configure the PCI-MXI-2
This section describes how to configure the following options on the
PCI-MXI-2.
Configuration EEPROM
Onboard DRAM
Figure 2-1 shows the PCI-MXI-2. The drawing shows the location and
factory-default settings on the module.
!