National Instruments VXI Water System User Manual


 
Index
VXI/VME-PCI8022 for Solaris I-2
©
National Instruments Corporation
default settings
Bus Configuration Editor
(table), 1-12
Device Configuration Editor
(table), 1-12
hardware settings (table), 1-11
Logical Address Configuration
Editor (table), 1-11
onboard DRAM, 2-3
parts locator diagram, 2-2
quick start, 1-6 to 1-10
VME-MXI-2 module, 4-1 to 4-10
configuration EEPROM, 4-7 to 4-8
default settings
Configuration Editor settings
(table), 1-14 to 1-15
hardware settings (table), 1-14
front panel features, 4-3
MXIbus termination, 4-5 to 4-6
onboard DRAM, 4-8 to 4-10
DRAM configurations (table),
4-9 to 4-10
SIMM size configuration
(figure), 4-9
parts locator diagram, 4-2
VMEbus A16 base address, 4-3 to
4-4
VME-MXI-2 intermodule signaling,
4-4 to 4-5
VXI-MXI-2 module, 3-1 to 3-18
configuration EEPROM, 3-15 to
3-16
default settings
Configuration Editor settings
(table), 1-14 to 1-15
hardware settings (table), 1-13
front panel features, 3-3
MXIbus termination, 3-13 to 3-14
onboard DRAM, 3-17 to 3-18
removing metal enclosure, 3-3
right-side cover (figure), 3-2
trigger input termination, 3-12 to
3-13
VXIbus CLK10 routing, 3-8 to 3-12
VXIbus local bus, 3-7 to 3-8
VXIbus logical address, 3-4 to 3-5
VXIbus Slot 0/non-Slot 0, 3-5 to 3-7
configuration editors. See PCI-MXI-2
Configuration Editor; VXI/VME-MXI-2
Configuration Editor.
configuration EEPROM, C-1 to C-3
controlling EEPROM operation, C-1 to
C-2
fixing invalid EEPROM configuration,
C-2 to C-3
PCI-MXI-2 board, 2-3
VME-MXI-2 module, 4-7 to 4-8
VXI-MXI-2 module, 3-15 to 3-16
configuration settings, PCI-MXI-2
loading from file, 6-4
reverting to current settings, 6-4
saving to file, 6-4
updating current configuration, 6-4
controller
Default Controller (LA-1), 6-11
MXI System Controller, 6-14 to 6-15
MXIbus System Controller, 6-27
VMEbus System Controller, 6-23 to 6-24
customer communication, xv, E-1 to E-2
D
Default Controller (LA-1), 6-11
default settings, 1-10 to 1-15
PCI-MXI-2 board
Bus Configuration Editor
(table), 1-12
Device Configuration Editor
(table), 1-12
hardware settings (table), 1-11
Logical Address Configuration
Editor (table), 1-11