Filter
Top Products
24
W415-0788 / A / 09.22.09
4.2 CHANGING A TOP VENT TO A REAR VENT
In order to convert the venting confi guration from a top exit to a rear exit, remove components as illustrated.
When reinstalling in the alternate position: Check gaskets for tears, replace if necessary to ensure a proper
seal.
4” Gasket
7” Cover Plate
7” Gasket
4” Gasket
4” Collar
7” Gasket
7” Collar
Outer Top
4” Cover Plate
Top Heat
Shield
Optional trivet required when converting
to rear exit.
FIGURE 4.2