Filter
Top Products
73
PC and Mac Client Software for Remote Viewing
Manual Recording (PC Only)
You can use the REC button to create a manual recording of the display area anytime
during live viewing.
NOTE: Manual
r
ecording is not available on Mac or via browser.
To take a manual recording:
1 Cl
ick the REC but
ton ( ). The REC button flashes to indicate manual recording is on.
2 Click the REC butt
on again to stop recording.
NOTE: Manual recordings are saved to
C:\DVR_Backup
.
NOTE: The REC button tak
es a recording of the entire display area. To take a recording of
a single camera, you must select it before clicking REC.
Accessing Remote Speed Dome Settings (PTZ Controls) (PC Only)
You must connect and configure PTZ cameras locally on the DVR before you
can use remote PTZ controls. For instructions on connecting PTZ cameras,
see “Appendix C: Connecting PTZ Cameras” on page 108.
!
Using the Speed Dome menu, you can control your PTZ cameras (not included) remotely.
NOTE: Remote Speed Dome settings are not available on Mac or via browser.
To access Speed
Dome
Settings on Client Software:
1 Click the channel number that the PTZ c
amera is connected to.
Select the channel for
the PTZ camera
Speed Dome