Filter
Top Products
4
Rear Panel (16-Channel)
1 2 3 4 5 6 7 8 9 10
1 DC 12V: Connect the included DC power adapter to power on the DVR.
2 LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
3 HDMI: Connect to an HDMI-compatible TV or monitor (not included). Note that the DVR
c
annot use a VGA and HDMI monitor at the same time.
4 RS485: Connect RS485 ca
bles for compatible PTZ cameras (not included).
5 VGA: Connect to a V
GA monitor (not included). Note that the DVR cannot use a VGA and HDMI
monitor at the same time.
6 USB: Connect a USB mouse (included), touch screen
monitor (not included), USB flash drive
(not included) for data backup and firmware updates, or self-powered external hard drive (not
included) for disk mirroring (PC required) or expansion.
NOTE: The
DVR supports a single external hard drive up to a maximum size of 2TB. The
e
xternal hard drive must be self-powered to work with the system; it cannot receive
power from the DVR’s USB port.
7 Audio O
u
t: Output for audio channel.
8 Audio In:
Input for audio channel.
9 Video IN 1~8CH: Con
nect Octopus BNC connector here. Connect BNC connectors from
cameras 1-8 to Octopus BNC connector.
10 Vi
deo IN 9~16CH: Connect
Octopus BNC connector here. Connect BNC connectors from
cameras 9-16 to Octopus BNC connector.