Filter
Top Products
20
Recording
By default, the system is set to immediately record video from all connected cameras in
Continuous Record Mode.
You can set the system to stop recording once the hard drive is full, or to continually record
by overwriting previously
recorded data. For more details, see “Record” on page 35.
Event Recording
The DVR includes the following modes of event recording:
•
Motion: The DVR records when motion is detected by the affected camera.
•
Video Loss: The DVR records when a camera is disconnected or suffers video loss.
The system employs a pre-record function to capture
video seconds before events occur.
Recording Audio
The system can record one audio channel. You must have an audio-enabled camera or
self-powered microphone connected to the system in order to use this function.
For details, see “Appendix D: Recording and Playing Audio” on page 111.