Filter
Top Products
89
Mobile Apps: Accessing your DVR Using a Mobile Device
5 Under ID and Password, enter the Remote Access user ID (default: 9) and Password (default:
3333) for the DVR.
6 Touch the Connect button
at the top-right corner of the screen.
• If you are asked if you want to save changes, touch YES t
o save your DVR’s information in the
Address Book or NO to connect without saving your DVR’s information.
7 The iPad connects to your DVR and displays streaming video. To disconnect from your DVR,
t
ouch Exit.
Tip: At any time, tap the
display area to enlarge
to full screen. Tap again
to exit full screen
Exit
Backup file list
Main Viewing Page
Viewing interface on the iPad
NOTE: The interface for navigating the app is the same as through the Client Software or
an Internet browser, except some features are not supported, such as the Event
List. See “PC and Mac Client Software for Remote Viewing” on page 62.
1. Some routers may prevent you from connecting to your DVR using a DDNS address on a local
network. If you are unable to connect, try disabling WiFi on your mobile device and attempt to
connect using the 3G or mobile network. If you need to use WiFi, use the DVR’s internal IP address
to connect.