Filter
Top Products
49
Using the Main Menu
Restoring to Factory Default
Settings
Restoring to factory default settings
reverts any setting changes you have
made to their original settings. This
does not affect the recordings saved on
the DVR. You can reset a single menu,
or all menus.
To load system defaults:
1 Rig
ht-click to open the Menu Bar and click
the Main Menu button ( ).
2 Cl
ick Advanced. Then click Load Default.
3 Se
lect the menus that you wish to restore
to default settings, or click All to restore
the entire system to default settings.
4 Cl
ick Apply.
5 When the warning
window appears, click
OK to restore your settings.
6 Cl
ick OK to return to the menu.
7 Right-click until y
ou have exited all menus.
The DVR prompts you to restart.
Restarting or Shutting Down the
DVR
To restart or shut down the DVR:
1 Right-click t
o open the Menu Bar and click
the Main Menu button ( ).
2 Click Adv
anced.
3 Click Reboot or Sh
ut Down.
4 F
ollow the on-screen instructions to
restart or shut down your system.
Configuring System Warnings
The system can send out email
notifications, or trigger a connected
alarm device if it detects system
abnormalities. For example, the system
can send out a warning if the hard drive
is low on storage.
Reboot / Shut Down