Lopi Burner Burner User Manual


 
6 Specifications
Travis Industries 100-01159 4040621
Features:
- Ember Fyre™ Burner for "Wood Fire" Look
- Works During Power Outages (millivolt system)
- High Efficiency
- Optional Thermostat or Remote Control
- Optional Blower for Quicker Heat Distribution
- Convenient Operating Controls
- Variable-Rate Heat Output
- Low Maintenance
Installation Options:
- Freestanding Stove
- Horizontal or Vertical Vent
- Residential or Mobile Home
- Straight or Corner Placement
- Bedroom Approved
Heating Specifications:
Approximate Heating Capacity (in square feet)*............500 - 1,500 with Blower, 500 to 1,200 Without
Maximum Input ........................................................................................31,000
Output from Low to High (in BTU’s per hour)..............................................16,608 to 26,815
Steady State Efficiency............................................................................Up to 86.5 %
AFUE (without blower) .............................................................................Up to 72.8 %
Heating capacity will vary depending on the home’s floor plan, degree of insulation, and the outside
temperature.
** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent
of installed system.
Dimensions & Weight:
Weight: 215 Lbs.
NOTE:
Measure side, corner,
and back clearances
from the stove top.
19"
4-7/8"
26-3/4"
The flue collar protrudes
7/8" above the stove top
28-1/8"
16-1/8"
Electrical Specifications (for optional blower)
Electrical Rating.........................................................115 Volts, 1.3 Amps, 60 Hz (150 watts on high)
Fuel:
This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using
the included LP conversion kit. The sticker on top of the gas control valve will verify the correct fuel.