Filter
Top Products
42 Optional Equipment (for qualified installers only)
Travis Industries 100-01159 4040621
Stone or Cast Insert Installation
WARNING: Turn the gas control valve to off and make sure the appliance has fully
cooled prior to conducting service.
1. Remove the
face following
the directions
to the right.
2. Remove the
stove top
following the
directions to
the right.
3. Loosen the
front and back
bolts holding
the side insert
retainers
following the
directions to
the right.
Use the latch tool to open the face
latches on both sides.
With the door latches disengaged,
the face can be removed.
NOTE:
Enameled
parts can be
easily
damaged by
mis-handling.
Phillips
Screwdriver
On Older Units:
Loosen (or remove) the
screw and locking tab
under the stove top.
Use both hands to pull the
stove top forward, rotate it
up, then lift it off the stove.
3/8" Wrench
Side Insert Retainer
Loosen the bolts at the
front of the cast sides a
couple of turns. Then
rotate the retainer up.
NOTE: on the Sheffield,
remove the side clips first.