Filter
Top Products
36 Optional Equipment (for qualified installers only)
Travis Industries 100-01159 4040621
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Remove the face and glass (see page 22). Remove the log set (if installed - page 24)
2 Remove the burner (see illustration below).
When Installing, make sure the burner is fully seated - it
rests on these supports. Replace the ember trays last.
Reach into the firebox and
lift the burner upwards.
Pull the burner forward, out
of the firebox.
This tube on the burner
inserts into this tube on the
mixing tube.
Do not lift burner out by the
pins.
Remove the ember trays from
both sides of the burner.