Filter
Top Products
Ref
Osc
Hem
10
MHz Freq Standard None
Sets the synthesizer to free-run
operation, where no frequency
standard is used.
Programming Codes
SCPI: ROSCillator:SOURce
INTernallEXTernallNONe
Analyzer: NONE
See Also
Softkeys listed above.
(RF ON/OFF)
Function Group
Menu Map
Description
Programming Codes
See Also
ROTARY KNOB
Function Group
Menu Map
Description
Programming Codes
See Also
POWER
NONE
This
hardkey
turns the RF power output on or off. Press
(-ON/OFF).
If the yellow LED above the
hardkey
is off, power is off, and RF OFF
appears in the message line of the display. Press the key again to
turn on RF power and restore the power value last entered.
SCPI: POWer[:STATe] ON(OFF]l]O
Analyzer: RF1 power on,
RF0
power off.
(MOD),
(POWER
LEVEL)
R-2
Operating and Programming Reference
ENTRY
NONE
The rotary knob is active whenever the entry area is on. It controls
a rotary pulse generator that allows analog-type adjustment of the
active entry area. Although the rotary knob has the feel of analog
control, it is actually a digital control that generates 120 pulses per
revolution.
NONE
ARROW KEYS, ENTRY KEYS
“Entry Area,” in Chapter 1.
HP 8360
User’s Handbook