Filter
Top Products
Doubler Amp Mode Off
Programming Codes
SCPI:
POWer:AMPLifier:STATE:AUTO ONlOFF[Oll
POWer:AMPLifier:STATE:AUTO?
Analyzer: NONE
See Also
Dblr
hp
Menu
Doubler Amp Mode Off
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User’s Handbook
POWER
5
This
softkey
is applicable to instrument models with a doubler
installed. The doubler has an integral amplifier whose operation is
controlled by the instrument firmware. This
softkey turns off the
automatic mode of operation and turns off the amplifier so that it is
never used. This is
an
unspecified mode of operation since the output
power may not be at the maximum leveled output power specification
at frequencies generated in the doubled mode. This softkey has no
effect on instruments without a doubler.
An asterisk next to the key label indicates that this feature is active.
SCPI:
POWer:AMPLifier:STATE
ON(OFF(O(1
POWer:AMPLifier:STATE?
Analyzer: NONE
Dblr
hnp
Menu
Operating and Programming Reference
D-9