Filter
Top Products
ALC Bandwidth
Select Low
Function Group
ALC
Menu Map
1
Description
This softkey sets the synthesizer to the ALC low bandwidth position
(10 kHz). In this mode, the ALC bandwidth operates in a narrow
bandwidth for all sweep and modulation conditions. An asterisk next
to the key label indicates that this feature is active.
Programming Codes
SCPI: Sending the synthesizer an ALC bandwidth frequency value of
510
kHz causes it to select the low ALC bandwidth mode.
POWer:ALC:BANDwidth:AUTO OFF]0
POWer:ALC:BANDwidth
<freq>[freq
suffix] or
MAXimum
1
MINimum
Analyzer: NONE
See Also
(ALCI,
ALC BW Menu
“Optimizing Synthesizer Performance” in Chapter 1.
ALC
BW
Menu
Function Group
ALC
Menu Map
1
Description
This
softkey
reveals the softkeys of the ALC bandwidth select menu.
ALC Bandwidth Select Auto
Sets the ALC bandwidth to be
automatically chosen by the
synthesizer, depending on the
current sweep and modulation
conditions.
ALC Bandwidth Select High
Sets the ALC bandwidth to the
high bandwidth position (100
kHz),
and to remain there for all sweep
and modulation conditions.
ALC Bandwidth Select Low
Sets the ALC bandwidth to the low
bandwidth position (10
kHz),
and
HP 8360
User’s Handbook
Operating and Programming Reference
A-l 1