Filter
Top Products
Preset Mode User
Function Group
SYSTEM
Menu Map
8
Description
This
softkey
sets the standard starting configuration of the
synthesizer when the (PRESET) key is pressed, as set by the user. You
can define any starting conditions: Set up the synthesizer with the
conditions you want, then select Preset Mode User . Now whenever
you press
(PRESET),
the synthesizer returns to the configuration
you set. If preset mode user is set, when you press (PRESET), the
synthesizer displays the following:
*** USER DEFINED PRESET RECALLED ***
You can still do a factory preset. When the user preset mode
is active, the softkey Factory Preset appears when you press
(PRESET). An asterisk next to the key label indicates that this feature
is active.
Programming Codes
SCPI:SYSTem:PRESet TYPE USER
Analyzer: NONE
See Also
[PRESET),
Preset Mode Factory, Save
User
Preset
“Changing the Preset Parameters,” in Chapter 1.
Printer Adrs
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This softkey lets the synthesizer recognize a printer address between
0 and 30. The synthesizer can act as a controller for a printer during
self-test, if the log-to-a-printer feature is initiated.
SCPI: DIAGnostic:INSTrument:PRINTer:ADDRess <num>
Analyzer: NONE
Adrs Menu,
Selftest
(Full)
P-10
Operating and Programming Reference
HP 8360
User’s Handbook