Filter
Top Products
C
(CENTER)
Function Group
FREQUENCY
Menu Map
NONE
Description
This
hardkey
lets you select the center frequency for center
frequency/frequency span swept operation. When you press
[?Ki=i$,
the synthesizer displays:
-->
CENTER:
XXXXX MHz. Where XXXXX
represents a frequency value. Use the entry area to set the desired
value.
Certain center frequency and frequency span combinations cause the
synthesizer to limit the value entered. In general, any combination
that would cause the synthesizer to exceed its minimum or maximum
specified frequency will be limited.
Programming Codes
SCPI:
FREQuency:CENTer
<num>[freq
suffix] or
MAXimumIMINimumlUPIDOWN
FREQuency:MODE
SWEep
Analyzer: CF
See Also
(SPAN),
(m),
(STOP)
“Center Frequency/Span Operation” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference C-l