Filter
Top Products
AM Menu
Function Group (MOD)
Menu Map
4
Description
This softkey (Option 002 only) accesses the amplitude modulation
softkeys. These softkeys engage external and internal amplitude
modulation. They allow you to define the scaling, waveform, rate,
and depth of the internal AM.
AM
On/Off
Ext
Toggles on and off the amplitude modulation mode
for an external AM source.
AM On/Off
Int
Toggles on and off the amplitude modulation mode
using the internal AM generator.
Internal AM Rate
Sets the rate of the internal amplitude modulation.
Internal
AM Depth
Sets the depth of the internal amplitude
modulation.
AM Type
100%/V
Sets the scale to linear at 100% per volt.
AM
Type
JOB/V
Sets the scale to exponential at 10 dB per volt.
Deep AM
Opens the ALC loop when the detected signal
level power is below the detector’s sensing range.
Uavef
orrn Menu
Displays the waveforms for internal amplitude
modulation.
Programming Codes
SCPI: NONE, see the individual softkeys listed.
Analyzer: NONE
See
Also
IhnoD_1,
also see “AM” and “Modulation”.
A-14
Operating and Programming Reference
HP 8360
User’s Handbook