Filter
Top Products
Removal and replacement procedures 64
1. Insert the new heat exchanger unit into the same position as the heat exchanger unit you removed.
IMPORTANT: Keep the Torx screws separated according to their thread type and note which
thread type came from which hole location on the shipping bracket.
2. Install the two heat exchanger unit shipping brackets.
a. Align the heat exchanger unit shipping brackets to the screw holes on the heat exchanger unit
and the MCS frame (1).
b. Using a T-25 Torx driver, secure the two heat exchanger unit shipping brackets to the heat
exchanger unit by inserting and tightening four Torx screws (2).