Filter
Top Products
Removal and replacement procedures 55
4. Relocate the power inlet box. ("Relocating the power inlet box" on page 93)
5. Remove the air sealing plate. ("Removing the air sealing plate" on page 35)
6. Remove the air deflector plate. ("Removing the air deflector plate" on page 33)
7. Remove the condensation pump and sensors. ("Removing the condensation pump and sensors" on
page 47)
8. Remove the AC transfer switch. ("Removing the AC transfer switch" on page 26)
9. Remove the plastic lock washer from above the paddle-wheel sensor.
10. Unscrew the plastic screw cap securing the paddle-wheel sensor to the flow meter.
11. Lift the paddle-wheel sensor up and off the flow meter.