Filter
Top Products
Removal and replacement procedures 25
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord
extends from the storage system.
4. Disconnect the two AC power cables from the power connectors, labeled Primary and Secondary,
on the power inlet box.
5. Disconnect the network cable from the RJ-45 connector on the power inlet box.
Shutting off the water
1. Shut off the water flowing into the MCS unit at the facility-side shut-off valve.