23Heatilator • ECO-WINS18 • 7065-132B • August 29 2011
E. Bafe & Ceramic Blanket Removal
F. Door Handle Assembly
1. Installwasherondoorhandleshaft.
2. Slidedoorhandlethroughdoor.
3. Installadditionalwasher(s)asshowninFigure 23.3.
4. Installkeyingroove.
5. Aligngrooveinlatchcamwithkey;slidelatchcamover
shaft
6. Installlocknutbutdonotovertighten,thehandleneeds
tomovesmoothly.
7. Installhandleturninginacounter-clockwisemotionto
desiredlocationondoorhandlerod.Figure 23.3.
CAUTION!Donotovertightenlocknut.Thedoorhandle
needstomovesmoothly.
Figure 23.1
Figure 23.3
Locknut
Door Cross Section
(example)
Latch Cam
Spacing
Washers
Square Key
Door Handle
Spring
Handle
1. Removeallashfromtherebox,andextinguishallhot
embersbeforedisposalintoametalcontainer.
2. Removethebafeprotectionchannelbyrotatingitdown
fromthefronttube.Figure 23.1.
3. Thebafeboardhas2pieces.Withtheceramicblanket
stillinplace,slideonebafepieceoverthetopofother
oneandpullouttoppiecethroughthedooropeningand
thenremovebottombafepiece.Figure 23.2.
4. Removetheceramicblanket.
5. Re-installtheceramicblanketandsmoothouttheblanket.
6.
Slidethebafepiecesonepieceatatimeunderneaththe
blanket.Besurethebafeboardsareevenwiththefront
manifoldtubeandisrestingonalltubes.Figure 22.1 and
22.2.
7. Re-installthebafeprotectionchannel
byrotatingitupand
aroundthefronttubesothebottomangeofthechannel
restsbehindthemanifoldtube.Thebafeboardsand
blanketaretuckedinsidetherearofthe
bafeprotection
channel.
2 pc Baffle Board
Manifold Tubes
Baffle
Protection
Channel
Ceramic Blanket on Top
Baffle Boards & Blanket
even with front tube and
resting on back tube
Figure 23.2