Heatiator ECO-WINS18 Indoor Fireplace User Manual


  Open as PDF
of 48
 
Heatilator • ECO-WINS18 • 7065-132B • August 29 2011
22
D. Blower Replacement
1. Removesurroundfromunit.
2. Usingaphillipsheadscrewdriver, remove8-32 screw,
washerandbushingassembliesholdingleftsidepanel
inplace.Removepanel.Figure 21.1
3. Disconnectthewiresfromtheblower.
4. Removethreewingnutsasshown.Figure 22.1
5. Removeblowerassemblyfromunit
6. Usingphillipsheadscrewdriver,removetwo8-32sheet-
metal holdingthe blowermount bracketto the blower
shield.Figure 22.2
7. Remove four 8-32 machine screws holding blower to
blowermountbracket.
8. Re-installinreverseorder.Becertainthattheholddown
bracket’s screws are completely seated in the grom-
mentsandinsulationboardisplaceproperly.
Shock Risk.
• DoNOTremovegroundingprongfromplug.
• Plugdirectlyintoproperlygrounded3prong
receptacle.
• Routecordawayfromappliance.
•
DoNOTroutecordunderorinfrontofappliance.
CAUTION
Figure 22.1
DoNOTallowhotcoalsoremberstooverowashlip
• Maymeltprotectivewirecoatingonfanpower
cordcausingelectricalshort,reorinjury
Fire Risk.
WARNING
WING NUTS
BLOWER MOUNT
BRACKET
BLOWER SHIELD
8-32 SHEET-
METAL
SCREWS
(x2)
Figure 22.2
8-32 MACHINE
SCREWS
(x4)
 previous next