Filter
Top Products
44
Pellets or Corn/Pellet Mixture Only 3-90-775 Save These Instructions
31 3/8"
797 mm
24 7/8"
632 mm
Minimum
Width- 40"
1016mm
28 11/16"
729 mm
Arched- Minimum
Center Height
Arched- Minimum
Side Height
Rectangular-
Minimum Height
P35i Custom Surround -
Part #: 1-00-774221-SPL
The top of the mounting frame
must be covered at this point.
This diagram shows the minimum dimensions of a custom t surround panel, part number
1-00-774221-SPL. Note that arched surrounds can only be made at. Therefore, the intake air
slots, normally in the sides of the surround, are moved to the face. Rectangular surrounds can
be made at if desired, and they will also have the intake slots in the face.