Filter
Top Products
32
Pellets or Corn/Pellet Mixture Only 3-90-775 Save These Instructions
k. With this cover removed, you can vacuum the
paddle fan and the inside of the chamber. Be careful
not to bend the blades on the paddle fan.
l. Before reinstalling the access cover, make sure the
insulation between the two layers is in tact.
d. Un-latch and remove the ash pan. Dispose of the
ashes in a metal container with a tight tting lid.
e. Remove the two (2) corner cleanout covers by re-
moving the wing-screws (one per).
f. Brush or vacuum the remaining ash from the re-
box.
g. Guide the vacuum hose upward into the exhaust
passage in the right rear corner of the rebox.
h. You can now return all pieces inside the rebox and
close the door.
i. Release the spring latches and slide the insert body
out onto the hearth or onto the service rail kit, if pur-
chased.
j. Remove the exhaust chamber access cover on the
right rear of the insert.
Whenever run to empty
User
Whenever the hopper is empty, inspect and remove
any large amounts of sawdust or nes. Although this
ner material will mostly feed through with the fuel,
large quantities of sawdust may restrict feeder ow.