Filter
Top Products
31
Save These Instructions 3-90-775 Pellets or Corn/Pellet Mixture Only
Keep combustible materi-
als, gasoline and other ammable vapors and liquids
clear of the appliance.
• Do store ammable materials in the vicinity
of the appliance.
• Do use gasoline, lantern fuel, kerosene,
charcoal lighter uid or similar liquids to start or
"freshen up" a re in this appliance.
Keep all such liquids well away from the heater while
it is in use, as combustible materials may ignite.
Do store fuel:
• Within the required clearance areas of the appli-
ance.
• Within the space required for fueling or ash re-
moval.
Monthly or more frequently depend-
ing on fuel quality and/or ash buildup.
User
a. Loosen the two wingscrews located on the front of
the burn pot housing.
b. Lift the cover off of the wingscrews and set aside.
c. Using your ash-vac, remove any ashes or debris from
the air chamber.
d. You can tap on the igniter, located above the cleanout
hole. This will help to remove any accumulation on
the igniter element.
e. Re-install the cleanout cover and tighten the
wingscrews. Be sure that the cover is completely
covering the hole, as air leakage here may lead to
incomplete combustion or poor ignition.
Monthly or after each ton of fuel is
burned.
User
It is recommended that you use a vacuum that is
designed for ash, as ashes may block conventional
vacuum lters.
NOTICE: For optimal performance of your pellet burn-
ing appliance, you must perform regular cleaning and
maintenance as directed in this manual. Not doing so
will result in:
Poor performance
Smoke spillage into the room
Overheating of components
Failure to perform regular cleaning on your pellet
burning appliance will void the warranty.
a. Make sure the re is out and cool. Disconnect
power cord prior to servicing.
b. Scrape the majority of ashes into the ash pan. Be-
gin with the back and roof above the burn pot.
c. Scrape the ashes from both sides, into the ash pan.