29
Save These Instructions 3-90-775 Pellets or Corn/Pellet Mixture Only
The best way to shut down the appliance is to simply
let it run out of fuel, and shut down naturally as the
temperature cools. This method is highly recommend-
ed for the end of season shut-down.
To shut-down otherwise, turn the mode selector to
"OFF' verify by ensuring that the Status light goes out.
The shut-down protocol of the circuit board will safely
allow the re to go out. All motors will stop when cool,
and only the POWER light will remain lit. It is now safe
to un-plug the electrical supply.
Cleaning or Inspection Frequency Daily Weekly Monthly Yearly
Area beneath burn pot grate /
Igniter After each ton of fuel burned OR X
Ash removal Depending on fuel quality OR X X
Burn pot grate surface Depending on fuel quality OR X
Combustion blower / paddle fan After each ton of fuel burned OR X
Distribution blower
More frequently depending on
surroundings OR X
Door latch inspection Prior to heating season OR X
Feeder body / Fines collection area Depending on fuel quality OR X
Firebox / thorough cleaning After each ton of fuel burned OR
X
Glass
When view of re becomes
obstructed OR X
Heat exchanger After each ton of fuel burned OR X
Hopper Whenever adding fuel OR X
Venting system
More frequently depending on
fuel quality and quantity OR X
When wood is burned, the products of combustion
combine with moisture to form a soot residue which
accumulates on the ue lining. When ignited, this
soot makes an extremely hot re. The entire venting
system should be inspected at least once every two
months during the heating season to determine if a
soot buildup has occurred. If soot has accumulated,
it should be removed to reduce the risk of a chimney
re.
Turn the control
to "Off". Keep appliance doors and hopper lid closed
and latched. Notify the re department. Do not oper-
ate the appliance until the chimney and connector
have been inspected and approved by a chimney
professional.
• Smoke spillage may occur if shut-down is not
complete
• Risk of shock if appliance is not disconnected from
the supply power prior to servicing.
NOTICE: For recommendation purposes only - More frequent cleaning is necessary if heavy buildup is
encountered at the recommended intervals, or if you see soot coming from the vent.