Filter
Top Products
P_'eg_a_ss'@_¢_ fe_' 2 o__3 Doe_ _Ope_e_'s (Continued)
A Operating 2 or 3 Door Openers:
• Tomoveoneof the doors.
• Enteryour PIN.
• Press
• Pressdoor openernumber (@ or @ or@ ).
t&_OUHTH6 HSW_U('?_OHS
T_seI_ypad m_S be mo_,_ted _ssght _£'the _:_00(s st/(}ast 5 feet
above tB® g_ouhd _hd c/e_'__d _r%zmevhg doo_' pats,,
A Mount Keypad.(Mounting screwslocated inside
battery compartment.)
• Remove Battery Cover.See Figure 3.
• Drill a 1/16" pilot hole for the top mounting screw.
• install a screw into the drilled hole,
leaving a 1/8" gap between the
screw head and the wall.
SeeFigure 2.
• Hook the Keypad over the screw.
Mark,drill pilot hole and fasten
bottom screw.
Reinstall Battery Cover.
Figure 2
1"
screw head gap
Figure 3
Red LED
Bottom
X/Mounting
Presshere Screw
NOTE
. DO NOT reprogram the Door Opener(s).
. Temporary PIN remains active until the next time your
normal PIN is entered.
_ _ _ _ _%_c_ _c
A Eraseold PIN:
• Pressand hold in order @_--_
- Red LEDwill blink once and turn off.
• Releaseall buttons.
Programming Door Opener(s).
• Return to"Programming for 1Door Opener"or
"Programming for2 or 3 Door Openers."