Filter
Top Products
Figure 27. Cabling—Cabled hard-drives with a PERC card
1. front-panel HDD LED controller
connector on the system board
2. SATA optical drive connector on system
board
3. SATA tape drive connector on system
board
4. system board
5. SAS connector on PERC card 6. PERC card
7. front-panel HDD LED controller
connector on the PERC card
8. hard drives
9. tape drive 10. optical drive
Next steps
1. Install the internal hard-drive bay into the chassis.
2. If disconnected, reconnect the power and data cable(s) to the remaining hard drive(s) in the internal
hard-drive bay.
Related Links
Removing the internal hard-drive bay
Installing a cabled hard drive
75