Filter
Top Products
Figure 50. Removing and installing an AC power supply unit
1. release latch 2. power supply unit cable connector
3. power supply unit 4. connector
5. power supply unit handle
Next steps
If you are not replacing the power supply unit in the second power supply unit bay immediately, install
the power supply unit blank in the empty power supply unit bay.
Related Links
Installing the power supply unit blank
Installing a redundant AC power supply
Installing a redundant AC power supply
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Verify that both the power supply units are the same type and have the same maximum output
power.
NOTE: The maximum output power (shown in watts) is listed on the power supply label.
3. If installed, remove the power supply unit blank.
120