Filter
Top Products
6. Secure the power supply divider to the chassis using the screw.
Figure 52. Removing and installing the power-supply divider
1. power supply divider 2. tabs (4)
3. screw
Next steps
1. Install the redundant power supply module(s) or power supply blank as applicable.
2. Reconnect the system to its electrical outlet and power on the system, including any attached
peripherals.
Related Links
Removing a redundant AC power supply
Removing the power supply unit blank
Installing a redundant AC power supply
Installing the power supply unit blank
Non-redundant AC power supply
Your system supports a non-redundant 450 W AC power supply.
NOTE: Non-redundant power supply is supported in systems with cabled hard drives and systems
with an x8 backplane.
123