Filter
Top Products
Steps
Insert the hard-drive blank into the hard-drive slot until the release button clicks into place.
Next steps
If applicable, install the front bezel.
Installing a 2.5 inch hard drive into a 3.5 inch hard-drive adapter
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Keep the #2 Phillips screwdriver ready.
Steps
1. Align the screw holes on the 2.5 inch hard drive with the screw holes on the 3.5 inch hard-drive
adapter.
2. Install the screws to secure the hard drive to the hard-drive adapter.
Figure 21. Removing and installing a 2.5 inch hard drive into a 3.5 inch hard-drive adapter
1. 2.5 inch hard drive 2. 3.5 inch hard-drive adapter
3. screw (2)
67