Filter
Top Products
3. Install the control panel assembly.
4. Connect the control panel cable, the LCD cable and the control panel USB cable to the system
board.
5. Follow the procedure listed in After working inside your system.
Related Links
Installing the control panel assembly cover
Installing the control panel assembly
Removing the LCD module
Removing the VGA module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the control panel assembly.
4. Remove the control panel assembly cover.
Steps
Release the hooks securing the VGA module to the control panel board and remove the VGA
module.
Figure 63. Removing and installing the VGA module
1. VGA module 2. control panel
3. hook (2) 4. VGA connector on the control panel
board
Related Links
Removing the control panel assembly
138