Filter
Top Products
8
Eclipse Veri-Flame Instruction Manual 818-2/02
The Eclipse Combustion Veri-Flame Single Burner Monitoring System controls
the start-up sequence and monitors the flame of single gas, oil, or combination
gas/oil burners. There are three different models to the Veri-Flame line: the no
purge, the purge and the modulation models. Each model features field select-
able trial for ignition (TFI). Each model is also available for use with four types
of flame sensor: ultraviolet (UV), self-check UV, infrared (IR) and flame rod.
The Veri-Flame No Purge and Purge models are available in three different
series—5602, 5603 and 5605. The 5602 Series is UL listed, CSA certified, FM
approved and IRI acceptable; the 5605 Series is UL listed, FM approved and IRI
acceptable. The 5603 Series is for 240VAC applications not requiring US or
Canadian certifications.
The Veri-Flame Modulation model is available in two different series: 5602
and 5603. Both series are capable of modulation (high and low fire purging). The
5602 Series is UL listed, CSA certified, FM approved and IRI acceptable. The
5603 Series is for 240VAC applications not requiring US or Canadian certifica-
tions.
Figure 1 .1
Veri-Flame Single Burner Monitoring System
(Purge Unit Shown)
PRODUCT
DESCRIPTION
Introduction
1