Filter
Top Products
LK3-B448E MARKII/BA-16
12. Using user programs
58
Clearing the user programs
2. Depress the foot switch to the second step.
3. Check the sewing pattern (see P.20), and then sew the pattern selected.
1. Switch the machine to recording mode by the procedure in steps 2. of recording a user program.
2. Use the DISPLAY SET switches !0 to specify the user program number which is to be cleared of data.
3. Press the RESET switch !2.
* The buzzer will sound and the user program with the number selected will be cleared.
* If you press and hold the RESET switch !2 until after the buzzer has sounded twice, all user programs will be
cleared.
NOTE:
If data has been recorded in user programs P1, P2, P3 and P4 and you then clear the data in user program P2, the contents
of P3 will be transferred to P2, and the contents of P4 will be transferred to P3.
1. Press the DISPLAY SET switches !0 to select the speed program number for the user program that you would
like to use.
*The user program numbers P1 to P4 can also be selected using the user program switches !1.
Using a user program