Filter
Top Products
LK3-B448E MARKII/BA-16
13
3. Installation
3-13. Installing the shooter
3-12. Installing the button feeder
1. Move button feeder base q to the front and rear and
left and right as necessary to install it by using hole
bolts w, spring washers e and washers r.
(And install ground wires ty.)
To vibrating bowl
To control box
(For vibrating bowl)
1. Raise the shooter lock pin w on the vibrating bowl q,
and secure the shooter e by inserting the pin w,
through the notch in the shooter.
2. Secure the shooter e with thumb screw r on button
feeder t.