Filter
Top Products
LK3-B448E MARKII/BA-16
11
3. Installation
3-7. Installing the machine head
1. Insert the two hinge assemblies q into the machine
head so that they are parallel, and then secure them
with the two set screw w.
2. Place the machine head gently on the table.
NOTE: Pull the cords e out as shown in the illustration
above in order to prevent them from being
clamped by the machine head.
3. Secure the two hinge assemblies q with the washers
r, the spring washers t, and the bolts y, and install
the machine head.
r
t
y
e
3-8. Installing the head rest
Tap the head rest q into the table hole.
NOTE:
Tap the head rest securely into the table hole.
w
q
1 mm