Filter
Top Products
10. SUMMARY OF DIP SWITCHES
RH-9800
56
10. SUMMARY OF DIP SWITCHES
Always turn off the power supply before changing any of the DIP switch settings.
10-1. Front panel DIP switches
The ON/OFF positions of the DIP switches inside the front panel are checked only once when the power is turned on.
Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
No. ON/OFF Description
ON Program mode disabled
1
*1
OFF Program mode enabled
ON Spare
2
OFF Spare
ON Front position
3
OFF Back position
ON Counting down to zero
4
OFF Counting up from zero
ON Pedal 1 operation
5
OFF Pedal 2 operation
ON Compatible with normally closed-type emergency stop switch (new)
6
*3
OFF Compatible with normally open-type emergency stop switch (old)
ON Upper thread remaining amount = Large
7
*2
OFF Upper thread remaining amount = Standard
ON Spare
8
OFF Spare
*1 The version of the PROM is given as “E1” or later.
*2 The version of the PROM is given as “D1” or later.
*3 The version of the PROM is given as “F1” or later.
If the position of DIP switch No. 4 is changed, the production counter will be reset to zero.
* The machine is shipped from the factory with the DIP switches set as follows.
1192Q