Filter
Top Products
7. SEWING
RH-9800
38
7-9. Using feed mode
In this mode, the feed bracket and the cloth presser can be moved while the needle is stopped.
It is useful for checking the relative positions of the throat plate and the cloth presser.
1. Press the MODE button (1) to switch to feed mode.
* "FEEd" will appear in the front panel display (J).
2. Press the cloth presser switch (2). The cloth pressers will be lowered.
3. Press the start switch (3).
The feed bracket (4) will move to the sewing start position.
* When the start switch (3) or the "Up" button (L) is pressed, the feed bracket (4) will move to the next sewing
position.
* If the "Down" button (K) is pressed, the feed bracket (4) will move to the previous sewing position.
* To return the feed bracket (4) to the cloth setting position while sewing:
1) Press the EMERGENCY STOP switch (5).
2) Press the RESET button (6).
Note: The knife will not operate during this time.
1184Q
1183Q
1182Q
(6) (1)
(K) (L)
(J)
(5)
(4)
(2)
(3)