Filter
Top Products
Instruction 24-9351
PCA
5.3 Calibrate Menu Screen
«TA-ZERO CALIBRATE
TA-SPAN NX
TL-ZERO CO
TL-SPAN DRAFT
The Calibrate Menu Screen is displayed after entering the correct pass-
word in the Maintenance Password Screen (Section 4.19) and selecting
CALIBRATION from the Maintenance Screen (Section 4.20). Use this
screen to select the sensor to be calibrated.
Press the st keys until the cursor (z) is in front of the desired function,
and then press the key.
NOTE: TA is the stack temperature sensor, while TL is the
optional Room Air/Primary Air temperature sensor.
NOTE: If a sensor is not installed (i.e., the instrument does
not have a Nitric Oxide sensor or thermocouple simulator
installed), the corresponding calibration screen will not be
displayed.
Front Panel Key Functions:
– Move cursor (z) up
– Move cursor (z) down
– Select sensor to be calibrated
– Go to Combustion Test Screen
– Return to Maintenance Screen
5-3
Calibration